Air Conditioner Tips – A guide To Air Conditioning Installation

The importance of air conditioners in your home or business premises cannot be overemphasized. It is always important to understand the various types of HVAC available in the market in order to be able to choose the right one for your home or business.

Basically, your HVAC system should be installed by a professional. However, you can also do it on your own if you are able to carefully follow the installation guide – that is often attached to the unit by the manufacturer.

There are different types of air conditioners that you can choose from. Each one of them has its own installation process. It’s always upon you to decide which one is best and easy to install to your home. Besides, a technician from Savannah Air Conditioning can also advise which model is easy to install and maintain.

The installation process plays a significant role in determining how efficient your HVAC will function. Below is an installation guide to each of the HVAC systems mentioned above.

Installation of a portable air conditioner

The portable air conditioning system is increasingly becoming popular in many homes. This is because of the following reasons:

    • You can install without the help of any other person
    • They fit in different types of windows rather than just one size
    • Portable air conditioners can be used throughout the year (those with heat features)

Step 1: Buy a conditioner that fits your space.

One of the reasons why most people don’t prefer installing standard window air AC is because they don’t have regularized windows. As such, it is important to ensure that your portable window unit has an exit strategy.

Step 2: Set up the window kit

It doesn’t matter whether you have a horizontal casement window or a vertical sliding one, you will still need to set up a window kit.

    • Start by cutting a foam strip to a proper length
    • The next step is to place the foam to the moving window
    • Put the plastic window once you have fixed the foam
    • Pull out the expansion piece to ensure there is a tight seal

Step 3: Securing the seal

After you have solidified your window kit, place a seal within the windowpane and the glass – to prevent air and insects from entering your house.

Step 4: Final setup

The last step involves putting a security bracket on the window – to make it easy to be opened from outside.

Installing a window air unit

Many people prefer window air conditioners because of the following reasons:

    • It can be installed to cool just one room
    • They are the best option for people who love a chilly sleep
    • The installation process is simple

Installation process

Another advantage of a window air conditioner is that it requires a few tools to install. However, you will need someone from ac repair Denver to help you balance the unit when installing.

The first step is to set the end of the window conditioner into the lower seal of the window. This is to balance the HVAC unit to ensure that it doesn’t fall when opening or closing the window. After firmly securing the AC in the window, you should insert locks so that the window pen cannot open.

Make a seal

The next thing in the installation process is to create a seal to ensure that no air can escape. To achieve that, you will have to place the unit at the center of the window so that the vents can easily be pulled out.

Split air unit installation

The split air AC has a lot of advantages compared to other HVAC systems. It’s called a split system because half of it is on the inside while the rest is outside. The compressor and other noise-making features are outside, whereas the duct system rests on the inside.

Installation process

The installation of a split air conditioner is a bit complex compared to the other HVAC systems.

Bridging the inside and outside gap

One of the advantages of a split system is that it doesn’t require a duct system or windows.

A split air AC has three sections:

Outside condenser

This section resembles a central air conditioning system often seen in most homes. It is usually placed outside because of the noise it produces.

Inside vent

The inside vent is like the control tower of the unit. It is where the temperature is regulated as well as the cooling of air takes place.

The connectors

There are two lines that connect the inside and the outside parts of the split air conditioner. They are made up of copper wire passing through the coolant. There is also electric wire together with tubes – that dispense water formed during the cooling process.

In general, every home or business premise requires a good air conditioning system. It is always important to ensure that you conduct proper research to identify an HVAC system that suits your needs.

Besides that, ensure that you hire a qualified and experienced person to install your unit if you can’t do it on your own.

Did you enjoy what you just read? Then you'll LOVE our book!
Going Gypsy: One Couple's Adventure from Empty Nest to No Nest at All Going Gypsy One Couple's Adventure from Empty Nest to No Nest at All 

- See how it all began!
ORDER NOW - Wherever Books Are Sold!
Amazon - Barnes & Noble - IndieBound - Books-a-Million
Also available as an audiobook from

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.